Customizable No backlash NC 4th Axis Rotary Table Rollar CAM Driver
C160
Product describtion
This silver-C160 four-axis rotary table center height is 135mm,
high precision and strong bearing capacity. It is widely used in
drilling and tapping machine tools by various mainstream systems
such as Mitsubishi, Fanuc, Siemens and Heidehan.
Compared with the traditional processing technology, when machine
equipped with four axes, which can process more than one surface at
a time, greatly improving the processing efficiency, especially
suitable for the processing of large quantities of products.
Mainly used to process 3C metal parts including mobile phone case,
watch, computer, etc
Product features vs worm gear
Silver-C160 is roller CAM driver struture, the characteristic of
roller CAM is very low backlash between roller bearing and CAM,
which can realize high precision machining.Due to the fact that the
actual contact surface of worm gear and worm is only single tooth
and single face, with a long time of rotation, the tooth surface
wear of the turbine leads to the gradual increase of the backlash,
and the machining accuracy will be gradually rough.
1. A zero gap back
2. No wear in rolling transmission
3. Good accuracy and high efficiency
4. High precompression rigidity
Product parameters:
| Description | unit | SILVER-C160 |
| Table Diameter | mm | Ø160 |
| Diameter of Table Central Hole | mm | Ø40H7 |
| Center Height (Vertical) | mm | 135 |
| Speed Reduction Ratio | / | 40 |
| Max. Rotation Rate of Table (Calculate with Fanuc α Motor) | rpm | 75 |
| Indexing Precision | sec. | ±20 |
| Repeatability | sec. | ±4 |
| Net Weight (servo motor excluded) | kg | 40 |
| Allowable Workpiece Load | Vertical | kg | 50 |
Horizontal | kg | / |
| Allowable Load | F | N | 8963 |
| Strength of Roller Gear Cam |  | N.m | 132 |
| Max strength of Roller Gear Cam | N.m | 185 |
| Allowable bending torque | N.m | 265 |
| Allowable Inertia Load Capacity | kg.m2 | 0.45 |
| Clamping Torque | N.m | 210 |
Clamping System
(Pneumatic / Hydraulic) | Mpa | 1 (Pneumatic) |
product dimession
Product application
FAQ:
Q1. Can you provide training for Installation and commissioning?
A. Yes, free training in our factory is available.
Q2. How about your price?
A. Send me details about what you need, pease do tell me the model
of the machine control system, you will get the best price. The
price is
competitive over the world.
Q3. What's your warranty terms?
A. We will supply a replacement for parts that prove to be
defective for a period of 12 months,
starting on the machine’s bill of lading date. Extended warranty is
available at the time of
purchase. Please contact your sales representative for details
